Description

The Shaft of each Sand Spike is made of 1.5in x 1.5in x 1/8in aluminum angle with a custom cut angled bottom

Each Sand Spike is topped with a hand bent 1in U that is Tig welded in place and coated in a UV resistant bright green epoxy; giving you a smooth protective barrier between your fishing rod and the aluminum.

The Rod Butt Holder is a piece of 2inx1/8in wall aluminum that is Tig welded into place; and a stainless steel bolt with a protective sleeve through the center. The nut end of the eye bolt is capped off with a 1/4 in crown nut leaving a smooth tight bolt that will not come out.

Each Sand Spike has two(2) 1/2in holes drilled 16” apart on center to accommodate the Sand Spike carriers.

Foot Peg

The Foot Peg is a 8in piece of 1.5in  x1.5 x 1/8 aluminum angle that has had the sharp edges rounded off; and is welded Tig Welded to the shaft, and topped off with a piece of glow in the dark anti-skid tape.

Beverage Tray

The Beverage Tray is a piece of 3in x 3in x 1/8in Square Tube capped off with a piece of 3inx1/8in flat bar Tig welded to the bottom; all of the rough edges are sanded down and it is welded on to the shaft. The beverage Tray will fit a 12oz. can in a thin walled can cooler, and for those dads on the beach it will accommodate the average sippy cup.  The Tray is deep enough to hold your beverage in place during windy conditions.